Sunshine Coast Auto Electrics

In today’s modern cars, mechanical components are often being replaced by electrical systems. This means that cars are more comfortable and secure, but they are also much more complex.

When an electrical component fails, it takes an auto electrical repair expert to diagnose and fix the fault.

Auto Electrics QLD’s qualified auto electricians have the experience, equipment and skills to diagnose faults and repair or replace electrical components and systems ranging from batteries, starter motors and alternators, through to electric window systems, central locking systems and immobilisers.

Email us for a quote!
Sunshine Coast Auto Electrics

So, whether you need your wiring repaired or your battery replaced, you can trust that Auto Electrics QLD will have you fixed up and back on the road in no time.

We are the 12 volt specialists! We are trained fitters in electric brake controller’s, solar accessories, Dual battery system’s, LED lighting, through to Custom 4WD or caravan fit out’s, UHF radio’s and full custom rewires of your toys.

“Don’t mess with an electrical engineer. It MEGAHERTZ!”

Case Study

A repeat customer brought his new toy in the workshop a ZD Fairlane. This was his pride and joy and had spent the last few years restoring the car, all that was left was to restore the electricals.

Our team rewired the necessary components and fitted new lights and accessories as per the customer’s request, and we were able to give the car back to customer in pristine electrical condition.

Needless to say he was a very happy man and could now register it and enjoy driving his newly restored toy.

Sunshine Coast Auto Electrics

Sunshine Coast Auto Electrics

These are just some of the auto electrical services we offer here at Auto Electrics QLD. If you have an auto-electrical issue, we can fix it. Please contact us for an obligation free quote.

  • Advanced Automotive Diagnostics

  • Dual Battery Systems

  • Alternator & Starter Motor Rebuilds & Replacements

  • Electronic Fuel Injection

  • Reversing Cameras and Sensors

  • ABS Anti Skid Braking Systems

  • SRS Air Bag Diagnostics & Repairs

  • Interior/Exterior Fan Replacements

  • Power Window Repairs

  • Central Locking Repairs

A few auto electrical parts you should know about


The alternator provides electrical power while the car is running and it is also responsible for charging your battery.
We can provide a new , repair or overhaul your original alternator or starter motor, for you car, truck, bus, motor home and many others.

Starter Motors are replaced by qualified auto electricians. Top quality parts meet all Australian standards & come with a 2 year/40,000 km nationwide warranty.

An Electric Trailer Brake Controller

This is a device that supplies power from the tow vehicle to the trailer’s electric brakes. Many styles are available that differ from how they look, to the number of brakes they can power, but all of them can be divided up into two main groups, Proportional or Time Delayed.

Proportional Brake Controller

With proportional brake controllers, once the brake pedal is stepped on, a motion sensing device knows how fast the tow vehicle is stopping.

It then applies power to the trailer brakes equally as fast (or slow) as the towing vehicle. This allows the trailer to stop at the same rate
as the tow vehicle. Therefore, in an extreme stopping situation where the vehicle brakes are slammed on, a proportional controller will immediately send the maximum preset power to the trailer brakes.

This type of brake controller provides the smoothest and quickest braking while also providing the least amount of wear on both the vehicle’s and trailer’s brakes. Proportional controllers are “enabled” by the brake pedal switch and “activated” by a pendulum circuit that senses the vehicle’s stopping motion and applies a proportional voltage to the trailer’s brakes. When properly adjusted the trailer will decelerate at the same rate as the tow vehicle, increasing braking efficiency and reducing brake wear.

Time Delayed Brake Controller

With Time Delayed trailer brake controllers, once the brake pedal is stepped on, the pre-determined amount of power (which is set by the user, based on trailer weight) is sent back to the trailer brakes. On time delayed controllers, a delay always exists from when the brake pedal is pushed to when the unit reaches the user set, maximum power output. The delay can be shortened or lengthened with the ‘sync’ switch, available on most time delayed controllers, but it behaves the same way for every stop (slow or fast). If the sync switch is set too low, the vehicle will do most of the initial braking, putting extra strain on the vehicle’s brakes. If the sync switch is set too high, the trailer will be braking harder. So in most cases, either the truck or the trailer will be doing the majority of the braking, resulting in uneven brake wear.

The time delayed brake controller system is easily installed and is very user friendly. It can be mounted at any angle. It also has a low profile. The amount of power that is sent back to the brakes is adjustable using a control on the brake controller. With most time delayed brake controllers, when towing with the hazard flashers on, the digital display will flash with the hazard flashers. If the brake controller is set too aggressively, pulsing may occur which will be felt in the trailer brakes. However, a pulse preventer can isolate the brake controller from the flashers and will eliminate the pulsing and flashing on the controller. A pulse preventer is not necessary for vehicles that have a different bulb for the stop and turn signals, which is typical of vehicles with amber turn signals.